Basic safety boot and shoe care guidelines

  • Always polish your boots regularly, with a commercial available footwear product (like Kiwi or Nugget), including on the day of purchase – before first wear. Do not use synthetic squeegee type bottles with a sponge end.
  • Clean your shoes regularly (use the spun bonded cloth inside the box) to remove excess dirt and grime on the upper.
  • Remove excess mud, dust or dirt with a brush from the sole.
  • Remove any upper marks using a damp cloth or light soapy solution if necessary.
  • Never force dry the footwear (near a fire, heater or with a hair dryer) if it becomes wet, as a direct heat source may distort the upper and cause the leather to crack. (Crumple newspaper into balls and jam them into the shoe/boot to absorb water overnight)
  • Never leave the bio-degradable PU soles in an unventilated or dark environment for long periods (over 24 months) in order to avoid hydrolysis.
  • Always undo the laces of the boot before removing. Do not try and turn it into a slip on. Constant standing on, and pressure applied to the back of the boot may cause the upper to loosen from the sole.
  • Allow the boot to dry “internally” overnight – open the tongue as far forward as possible and remove the top-sock/insole. [Your feet sweat 200ml per day].
  • Never throw “foot powder” into the boot. Foot powder is for feet!

Powder inside the boot can become a paste (when mixed with sweat) and will trap air flow, reducing the breathability of the leather – thereby increasing the temperature inside the boot.

  • Try to avoid; (1) deliberately scuffing the upper leather, (2) treading on sharp edges that can cut the sole and (3) walking/working in excess water for long periods of time.